Why spend hundreds on expensive media filters that just wind up in the landfill. These permanent filters feature a lifetime warranty. They are effective replacements for 6 inch thick filters from Accumulair, Aprilaire, Bryant, Carrier, Generalaire, Healthy Climate, Lennox, Payne, Space-Gard and others.
Replace your current MEDIA FILTERS or ELECTRONIC AIR CLEANER (EAC) CELLS with our permanent, washable 6-inch thick filter. Our filters develop a natural electrostatic charge as air passes through them...no electricity required. Just vacuum off or hose off to release the electrostatic charge and clean the filter. These 6 inch thick filters have the same specs as our popular Air Care Electra9400 filters.
PLEASE NOTE: As shown in the pictures, this filter consists of 2 inches of filter media in a thicker frame. Why not have more filter media? One might think that the thicker the media, the better the filter. However, this filter uses electrostatic media to trap particles. The media must be compacted to a specific density for the electrostatic fibers to build static electricity and attract dust. If the media layers were any thicker, it would create too much air resistance and be very hard to wash clean.
High 94.7% Dust Arrestance
Low 0.12" WG Air Resistance
Our 6 inch thick filters are available in the following thicknesses: 5-1/8 inch, 5-1/4 inch, 5-3/8 inch, 5-1/2 inch, 5-5/8 inch, 5-3/4 inch, 5-7/8 inch, 6 inch, 6-1/8 inch, 6-1/4 inch, 6-3/8 inch, 6-1/2 inch and 6-5/8 inch. Use the "Filter Thickness" drop down menu above to choose your current filter's exact thickness. Enter the width and height dimensions in the "Filter Width and Height" box above (ie: 16-5/8 x 24-5/8).
PLEASE MEASURE YOUR CURRENT FILTER. Do not go by the size printed on the filter as this is often different than the actual filter size. NOTE: Please double check the filter measurements you provide. Your filter(s) will be custom made for you so they cannot be returned if measured wrong.
Filters must be 24-5/8" or less on one side. For filters larger than 24-5/8" on both sides...please order our BoAir 2 Inch Thick Filters.
What is the MERV rating on your filter?
These filters are comparable to a MERV 8 filter. They develop their electrostatic charge naturally as air passes through them. They do not have to be plugged in to a power source. When choosing a filter, it is important to look at dust arrestance as well as air resistance. Our filters are designed to provide an excellent balance between HIGH dust arrestance and LOW air resistance.
Our 6-inch Air-Care 3-Stage filters feature a very low 0.12 W.G. air resistance and excellent 94.7% dust arrestance.
FILTER SIZING GUIDELINES
1. We can make our filters in 1/8 inch increments. Please type the EXACT filter size (Width x Height) you need in the box above.
2. Your filter(s) will be custom made for you. Please double check your size as we cannot provide refunds or exchanges due to errors in measurements provided to us when ordering. When measuring the filter slot, please allow room for any metal flanges, slots and/or doors in the filter housing area.
Some common 6 inch filter brands:
Aprilaire 2200, 2250, 2400, 201, 401
Generalaire AC-4, AC24
Healthy Climate PMAC-12C, PMAC-20C
Lennox PMAC-12C, PMAC-20C
Space-Gard 2200, 2250, 2400, 201, 401
Some common 6 inch filter sizes:
11.38 x 23.38 x 5.88